RS羅德FPL1000頻譜分析儀
如果您對該產(chǎn)品感興趣的話,可以
產(chǎn)品名稱: RS羅德FPL1000頻譜分析儀
產(chǎn)品型號: FPL1000
產(chǎn)品展商: R&S-羅德與施瓦茨
簡單介紹
RS羅德FPL1000頻譜分析儀 RS羅德FPL1000頻譜分析儀
RS羅德FPL1000頻譜分析儀
的詳細介紹
Brief Description
The R&S®FPL1000 spectrum analyzer makes measuring fast and simple. The intuitive touchscreen is straightforward and easy to use. With its solid RF performance, light weight and small footprint, the R&S®FPL1000 combines the functionality of a benchtop instrument with the portability of a handheld instrument.
In an RF lab, the R&S®FPL1000 is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals.
Key Facts
-
Frequency range 5 kHz to 3 GHz
-
SSB phase noise: –108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier)
-
DANL with preamplifier: –167 dBm from 10 MHz to 2 GHz
-
Lightweight with small footprint
-
Battery or 12/24 V DC operation (option)
-
Use with power sensors (option)
-
40 MHz analysis bandwidth (option)
-
Analog and digital signal analysis (option)
Features & Benefits
-
One instrument for multiple applications
-
Spectrum analysis
-
Signal analysis
-
Power measurements with power sensors
-
Solid RF performance
-
Low spurious responses
-
Low displayed average noise level (DANL)
-
Signal analysis bandwidth 40 MHz
-
Low level measurement uncertainty
-
Precise spectral measurements due to low phase noise
-
Intuitive user interface
-
High-resolution display
-
Multipoint touchscreen
-
Flexible arrangement of results and MultiView
-
Toolbar
-
Quiet operation
-
Fully portable
-
Battery pack and 12/24 V power supply
-
Carrying bag and shoulder harness
-
Low power consumption
Specifications
|
FPL1000 Specifications
|
|
Frequency
|
|
Frequency range
|
|
5 kHz to 3 GHz
|
|
|
Aging per year
|
1 × 10–6
|
|
|
with R&S®FPL1-B4 option
|
1 × 10–7
|
|
Frequency resolution
|
|
0.01 Hz
|
|
Bandwidth
|
|
Resolution bandwidth (–3 dB)
|
sweep filters
|
100 kHz to 10 MHz in 1/2/3/5 sequence
|
|
|
FFT filters
|
1 Hz to 50 kHz in 1/2/3/5 sequence
|
|
I/Q demodulation bandwidth
|
|
10 MHz
|
|
|
with R&S®FPL1-B40 option
|
40 MHz
|
|
Displayed average noise level (DANL)
|
|
RF preamplifier off
|
5 MHz ≤ f < 2 GHz
|
–152 dBm (typ.)
|
|
RF preamplifier on (option R&S®FPL1-B22)
|
10 MHz ≤ f < 2 GHz
|
–167 dBm (typ.)
|
|
Intermodulation
|
|
|
1 dB compression of input mixer
|
+7 dBm (nom.)
|
|
|
third-order intercept point (TOI) 300 MHz ≤ fin < 3 GHz
|
+20 dBm (typ.)
|
|
Phase noise
|
f = 1 GHz, 10 kHz frequency offset
|
–108 dBc (1 Hz) (typ.)
|
|
Total measurement uncertainty
|
1 MHz ≤ f < 3 GHz
|
0.5 dB
|
